Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Fresno
Furnace repair in Fresno typically runs $150 – $700 depending on the part and the furnace. Most jobs are completed the same day we arrive. If your heat is out on a cold January morning with tule fog hanging over Fort Bend County, call (903) 494-7686 and a real person answers, day or night.
We know Fresno’s housing stock because we work in it every week. The 1990s and 2000s stucco tracts off Trammel Fresno Road, the newer subdivisions pushing into former farmland south of town, the older pier-and-beam homes near the center of Fresno where swamp coolers still sit beside newer furnaces. Each generation of home fails differently, and a crew that only knows one style of construction will misdiagnose the others. Our team services all nine major residential brands, including Lennox, Goodman, and Rheem, and we stock common repair parts locally so Fresno customers aren’t waiting on a warehouse in another county.
Why Dalton Heating & Air Houston Is Fresno’s Preferred Furnace Repair Company
We’re a Garrison Partners company, operating under The Garrison Standard since 2003. That’s not a slogan. It’s a written operating code: arrive inside the stated window, put the price in writing before any work begins, do the job by the book, leave the site clean, and stand behind the work for a full year. Every tech who rolls up to a Fresno home is background-checked, uniformed, and factory-trained on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard furnaces.
Marco Benitez leads our team, and his name is on the standard we hold. Fresno homeowners tell us the same thing: they’ve had no-shows, door-price changes, and repairs that failed a month later. Our answer is written down before we touch a screwdriver. The price is the price. The repair is guaranteed in writing for 365 days. If it fails inside that year, we come back at no charge. No fine print, no prorated nonsense.
Response time matters here. Fresno sits close enough to Stafford and Missouri City that some companies treat it as a far edge of their map. We dispatch directly to Fresno, and our crews know the side streets off Highway 6 and the newer loops that feed the subdivisions along Teal Bend. When a furnace quits at 9 p.m. on a cold night, you’re not waiting for a callback window.
Styles & brands we work with
Emergency Furnace Repair in Fresno
Emergency Furnace Repair in Fresno means a furnace that won’t fire, a gas smell, or a unit short-cycling hard enough to trip the limit switch every half hour. When temperatures drop into the 30s and the tule fog rolls in, a dead furnace becomes a safety issue, not just a comfort problem. Our emergency repair work in Fresno runs the same $150 – $700 range as standard repair, and there’s no overtime charge for nights or weekends. You’ll get a written price before we start, whether it’s 2 p.m. or 2 a.m.
What We Check First
Most no-heat calls in Fresno come down to three things: a failed ignitor, a tripped limit switch, or a blower motor that’s overheated from fighting a clogged filter or undersized ductwork. We test each one in sequence, explain what we find in plain terms, and show you the failed part before we replace it. No mystery repairs.
Same-Day Service Into Fresno
We run same-day calls into Fresno every day of the week. If your furnace quits in the morning, there’s a good chance we’ll have a tech at your door before dinner. The 24/7 phone line is answered by a live person in our Houston dispatch office, and that person can schedule a Fresno call while you’re still standing next to the furnace.
Furnace Maintenance in Fresno
Furnace Maintenance in Fresno should happen every fall, before the first hard cold snap. This area’s long cooling season and the fine agricultural dust from surrounding fields mean furnaces here run dirtier than they do in coastal cities. A maintenance visit runs $80 – $200, takes about an hour to 90 minutes, and catches the small failures before they become $700 emergency repairs on the coldest night of January.
What a Tune-Up Includes
We clean the burner assembly, check the heat exchanger for cracks, test the flame sensor, measure the gas pressure, inspect the electrical connections, and replace the filter if you’d like. You get a written report of what we found and what we did. Our techs are not paid on what they sell. If we find a legitimate problem, we’ll show it to you and quote a repair. If we don’t, we’ll tell you that too.
Filter Replacement in Fresno’s Dust
Fresno’s air is hard on filters. Fine dust from nearby agricultural fields and construction clogs standard 1-inch filters fast, and a clogged filter does real damage: it raises static pressure, makes the blower motor work harder, and can overheat a heat exchanger until the limit switch trips. We’ll tell you exactly what filter your system needs and when to change it given your street’s dust load.
Trusted Brands We Service in Fresno
We’re factory-trained on nine major brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. Around Fresno, we see a lot of Lennox units in the 2000s stucco tracts, Goodman in the newer subdivisions on former farmland, and Rheem and York in homes near FM 521. Because we work these neighborhoods constantly, we keep common parts for these brands in local stock, which means faster turnarounds for Fresno customers. A Lennox pressure switch or a Goodman ignitor shouldn’t mean three days of no heat while a part ships from a regional warehouse.
Common Furnace Repair Problems We See in Fresno Homes
- Dust-clogged blower motors and coils: In neighborhoods like Woodward Park and Sunnyside, our techs find condenser coils caked with fine dust from nearby agricultural fields and construction, cutting efficiency by up to 30% before the first summer heatwave. That same dust finds its way into blower motors and furnace cabinets, and it kills airflow months before the homeowner notices anything wrong.
- Tripped limit switches from old ductwork: Older Fresno homes with pier-and-beam foundations often have leaky, undersized ductwork. That drives up static pressure, overheats the heat exchanger, and trips the high-limit switch, which looks like a furnace problem but is actually an airflow problem.
- Undersized furnaces in 2000s boom homes: Fresno’s rapid suburban expansion across former farmland means many homes built in the 2000s-2010s have undersized or improperly installed HVAC systems originally spec’d for smaller lots, now struggling with the added heat load from new concrete and reduced airflow in tightly packed subdivisions. A like-for-like swap fails on the first cold snap because the original unit was never sized for the house as it actually sits.
- Ignitor failures in high-humidity fog conditions: Winter tule fog in Fresno means moisture inside furnace cabinets, and hot-surface ignitors don’t like moisture. We replace more ignitors here between December and February than most coastal towns see all year.
See the difference
Before
After
Before
After
Before
AfterPricing for Furnace Repair in Fresno, TX
Most furnace repairs in Fresno run $150 – $700 depending on the part and the furnace. An ignitor replacement runs on the low end of that range. A blower motor or a gas valve runs toward the higher end. A cracked heat exchanger is a different conversation, and we’ll lay out the numbers honestly before you spend a dollar.
What affects cost: the brand of furnace, the age of the unit, whether the part is stocked locally or has to be ordered, and whether the problem is a single failed component or a symptom of a deeper issue like undersized ductwork. You’ll get a written price before any work begins, on every job, without exception. Estimates are free. Call (903) 494-7686 and we’ll quote the job over the phone when we can, or send a tech out to look at it in person.
| Service | Typical Cost in Fresno |
|---|---|
| Furnace Repair | $150 – $700 |
| Furnace Maintenance | $80 – $200 |
We Also Serve Cities Near Fresno
Our Furnace Repair team covers Fresno and the surrounding Fort Bend and northern Brazoria County communities. If you’re in Stafford, Pearland, Friendswood, or Webster and your furnace quits, we’ll have a tech out the same day. Dispatchers coordinate from our Houston office, and crews run local routes through Fresno daily.
Serving Fresno, TX - Our Local Coverage Area
We’re based in the Fresno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Fresno
Homes built during Fresno’s 2000s housing boom were often spec’d with furnaces too small for the heat load they actually carry now. New concrete, tight lot spacing, and reduced airflow around tightly packed subdivisions mean the original unit works harder than it was designed to. Add dust-clogged filters and leaky original ductwork, and the furnace overheats, trips the limit switch, and short-cycles. The fix is often not a new furnace with the same BTU rating. It’s a proper load calculation, sealed ductwork, and a correctly sized unit. Call (903) 494-7686 and we’ll measure the house, not guess at it.
In most of Fresno, check your filter every 30 days during heating and cooling season. If you live near active fields or construction on the south and east sides of town, you may need to replace a standard 1-inch filter every 3 to 4 weeks during dusty months. A clogged filter raises static pressure, overheats the blower motor, and can trip your limit switch. We’ll note your street’s dust load during a maintenance visit and give you a realistic schedule.
No, and you shouldn’t hire anyone who says yes. A cracked heat exchanger can leak carbon monoxide into the house, and it is not a repairable part. We’ll shut down the furnace, tag it, and walk you through replacement options with written pricing. In older Fresno homes with pier-and-beam foundations, the bigger issue is often the ductwork under the house. If that’s the problem, a new furnace on old ducts will disappoint you. We’ll tell you the truth about both before you spend anything.
Yes. Many older homes in central Fresno still run swamp coolers, and a common upgrade path is adding a furnace and central ductwork alongside or replacing the cooler. The work involves routing supply and return ducts, and in pier-and-beam homes the crawl space often makes the job cleaner than you’d expect. We’ll survey the house, check the electrical panel has capacity, and give you a written quote that includes the furnace, ductwork, and any panel work needed. No vague numbers.
Because the original unit was likely undersized or the ductwork was undersized, and the new unit inherited the same problem. In Fresno’s 2000s-era stucco tracts, we see this repeatedly: a like-for-like swap fails on the first cold snap because the house’s heat load grew over time while the ductwork and furnace sizing stayed the same. High static pressure overheats the heat exchanger, and the limit switch trips to protect the furnace. The real fix starts with measuring static pressure and inspecting the ducts. In a Woodward Park stucco home built in the mid-2000s, we traced a recurring furnace lockout to a failing blower motor straining against undersized original ductwork. Our tech replaced the blower motor, sealed the return plenum, and calibrated the thermostat; the homeowner now gets steady heat without the short-cycling that plagued their old single-zone system. That’s the difference between a box-swap and a repair that holds.
Call Dalton Heating & Air for Furnace Repair in Fresno
If your furnace is short-cycling, blowing cold, or won’t fire at all, call (903) 494-7686. A live person answers, day or night. We’ll get a tech to your Fresno home, put the price in writing before any work begins, and stand behind the repair in writing for 365 days. That’s The Garrison Standard, and it’s how we’ve operated since 2003.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Fresno since 2003.