Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Heat Pump Installation Across Seabrook
Heat pump installation in Seabrook, TX typically costs $3,500 – $7,500 depending on system size, ductwork condition, and whether your home needs electrical panel upgrades or corrosion protection for the coastal air. Most full-system replacements take one to two days once equipment arrives. We answer calls live around the clock at (903) 494-7686, and we serve every neighborhood from El Lago to Taylor Lake to the canal-front streets off Todville Road.
Seabrook is not Houston. The salt-laden onshore breeze off Galveston Bay punishes outdoor units in ways inland systems never experience, and many of the homes here were built between the 1970s and 1990s with ductwork and electrical panels that were never designed for a modern heat pump. Our Heat Pump Installation team sizes equipment to the actual house, not the old unit sitting outside. That distinction matters more here than almost anywhere else in the metro.
Why Dalton Heating & Air Houston Is Seabrook’s Preferred Heat Pump Installation Company
Homeowners in Seabrook call us because they are tired of crews that quote one number on the phone and another at the door. Dalton Heating & Air operates under The Garrison Standard, which has governed our work since 2003. The price goes in writing before any work starts. That is not a courtesy. It is the rule on every single job.
Marco Benitez leads our service area, and the standard he enforces is simple: arrive inside the window, price in writing before starting, do the job by the book, leave the site clean, and stand behind the work for a full year. Every repair carries a written guarantee. If it fails within 365 days, we return at no charge. We call it the 365-Day Done Right Promise, and it applies in Seabrook the same as everywhere else we work.
We also understand what Seabrook’s coastline does to equipment. Our technicians are trained on nine major residential HVAC brands, including Carrier, Trane, and Goodman, and our installers routinely specify corrosion-treated condenser coils for canal-front and lakefront homes. That is not an upsell here. It is the difference between a unit that lasts 12 years and one that pits out in six.
Seabrook homeowners see uniformed, background-checked technicians on every call. You know who is coming before they arrive. Dispatch and scheduling coordinate from our Houston office, but the crews that serve Seabrook live and work in the bayside communities. They know the roads, the setbacks, and the way salt air eats at uncoated aluminum.
Styles & brands we work with
Ductless Heat Pump Installation in Seabrook
Ductless Heat Pump Installation is often the right answer for Seabrook homes with original ductwork that leaks, or homes where a second floor never cools evenly. Ductless installation in Seabrook typically runs $3,500 – $7,500 depending on the number of indoor heads, the outdoor unit size, and whether the home needs a dedicated electrical circuit added. The job involves mounting one or more indoor air handlers on walls or ceilings, running a small refrigerant line set to an outdoor condenser, and connecting the system to power. There is no ductwork to seal and no attic plenum to lose conditioned air through.
For a 1980s split-level in Seabrook with hot upstairs bedrooms, a ductless system often solves what a central replacement cannot. We install a multi-zone unit with individual temperature control per room, so the upstairs no longer bakes while the downstairs overcools.
When Ductless Beats Replacing Ductwork
If your home’s ducts run through an unconditioned attic or crawlspace, or if static pressure measurements show the duct system is undersized for the equipment, replacing the heat pump alone will not fix comfort. In those cases, ductless installation in Seabrook eliminates the duct problem entirely rather than patching it.
Corrosion Protection for Coastal Ductless Condensers
Outdoor ductless condensers in Seabrook need the same salt-air protection as any other unit. We specify corrosion-treated coils and coated cabinets on every coastal install, including shore-facing single-family homes in the El Lago area where onshore wind carries salt mist year-round.
Heat Pump Service in Seabrook
Heat Pump Service in Seabrook covers everything from seasonal tune-ups to diagnosing a system that runs constantly but never reaches setpoint. Tune-ups in Seabrook run $80 – $200, while repairs typically fall between $150 and $650 depending on the part. If a compressor, reversing valve, or condenser coil has failed, we will put the repair cost in writing before any work begins, and the repair carries a written one-year guarantee.
Seabrook’s humidity means heat pumps here accumulate biological growth on indoor coils faster than drier climates. A service visit from our team includes checking refrigerant charge against manufacturer specification, measuring airflow, and cleaning the condensate line so it does not back up into the air handler. We also inspect the outdoor coil for early pitting or rust from salt exposure before it becomes a leak.
Seasonal Heat Pump Service
We recommend a spring tune-up before the cooling season and a fall check before switching to heat. In Seabrook, the shoulder seasons are short, and systems often run nearly year-round. A $80 – $200 tune-up catches small problems before they become $650 repairs.
Emergency Heat Pump Service
If your system fails during a July heat wave or a January cold snap, call (903) 494-7686. A live person answers 24/7, not a voicemail queue. We schedule emergency heat pump service in Seabrook based on technician availability, and every repair still carries the written price and written guarantee.
Why a Like-for-Like Swap Disappoints in Seabrook’s Older Homes
The biggest mistake we see in Seabrook is a homeowner replacing a 20-year-old heat pump with the same size unit, expecting better performance. It rarely works that way. Most homes here were built between 1970 and 1995, and their original ductwork was sized for older, less efficient equipment. The ducts leak, the returns are undersized, and the static pressure is often double what modern equipment is rated for.
In the El Lago area, our crew replaced a Goodman heat pump at a 1980s stilt home where the original ductwork ran through unconditioned space. We measured static pressure at 0.9 in. w.c., twice the SEER2 test condition, and found the existing 3-ton unit was only moving 950 CFM. After sealing the ducts and upsizing to a 4-ton two-stage heat pump with a corrosion-treated condenser coil, the homeowner stopped seeing mold on the registers and cut summer runtime by 30%.
The lesson is not that everyone needs a bigger unit. Most Seabrook homes need their ductwork and airflow fixed before or alongside the heat pump replacement. If you skip that step, you pay for efficiency you never actually receive.
Trusted Brands We Service in Seabrook
Our technicians are factory-trained to service and install nine major residential HVAC brands, including Carrier, Trane, Lennox, and Goodman. We keep common replacement parts for these brands stocked on our trucks when heading to Seabrook jobs, which shortens repair turnaround for homeowners along NASA Road 1 and the neighborhoods off Repsdorph. If you already have a brand preference, we can work with it. If you want a straight recommendation for a coastal Seabrook home, we will tell you which manufacturers offer the best corrosion protection at each price point and put it in writing.
See the difference
Before
After
Before
After
Before
AfterCommon Heat Pump Installation Problems We See in Seabrook Homes
- Original ductwork that kills efficiency. Homes built in the 1970s – 1990s in Seabrook often have ducts that leak 20 – 30% of conditioned air into unconditioned attics or under stilt homes. Installing a high-efficiency heat pump without sealing these ducts means paying for efficiency the house never feels.
- Indoor-rated condenser coils that rust out in 5 – 7 years. The onshore breeze off Galveston Bay carries salt mist constantly, and standard aluminum coils pit and leak quickly in canal-front neighborhoods near Clear Lake. A coastal-rated coil is not optional here.
- 100-amp electrical panels on 1980s homes. Many Seabrook houses built before 1990 still have 100-amp service. A modern heat pump with auxiliary heat strips can trip breakers or overheat the panel, so an electrical upgrade may need to happen before installation.
- Single-zone systems on two-story floor plans. A single thermostat cannot balance a two-story Seabrook split-level, leaving upstairs bedrooms humid and the downstairs overcooled. A two-stage or ductless multi-zone system addresses the imbalance instead of masking it.
Pricing for Heat Pump Installation in Seabrook, TX
Full heat pump installation in Seabrook runs $3,500 – $7,500 for most homes. The range reflects system size (2-ton to 5-ton), efficiency level (SEER2 rating), whether the ductwork needs sealing or replacement before or during the install, and whether the home’s electrical panel can handle the new equipment. A basic single-stage heat pump swap in a Seabrook home with good ductwork and a 200-amp panel lands near the lower end. A variable-speed system with coastal coil protection, duct sealing, and a panel upgrade approaches $7,500 or slightly above depending on scope.
We give every Seabrook homeowner a written, fixed quote before any work starts. That quote includes equipment, labor, refrigerant, electrical, and any code-required work. No door trip, no add-on surprise at the end. Call (903) 494-7686 for a free estimate at your home in Seabrook.
We Also Serve Cities Near Seabrook
Dalton Heating & Air Houston handles heat pump installation for homeowners across the bayside communities. Beyond Seabrook, our crews regularly work in Webster, Friendswood, Baytown, and Pearland. If you are just outside the city limits, call (903) 494-7686 and we will confirm coverage for your street.
Serving Seabrook, TX - Our Local Coverage Area
We’re based in the Seabrook area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Seabrook
Standard indoor-rated condenser coils will pit and leak within 5 – 7 years on Seabrook’s canal-front and lakeside homes because the onshore breeze off Galveston Bay carries salt mist constantly. We specify corrosion-treated coils and coated cabinets for every coastal install in Seabrook, which extends outdoor unit life to roughly the same range as an inland Houston system.
If you’re near Clear Lake, Taylor Lake, or the canals off Todville Road, ask for a coastal-rated condenser when you call (903) 494-7686. It is a specific upgrade, not a generic sales pitch, and we will price it in writing.
That pattern usually points to ductwork and air distribution problems, not a failing heat pump. Many 1980s Seabrook split-levels have undersized return ducts and leaky supply runs that deliver most of the cooled air to the downstairs before it ever reaches the upstairs bedrooms. The upstairs then stays humid because airflow is too low.
Replacing the heat pump alone will not fix it. The fix is sealing or replacing the ducts, possibly adding returns, and sometimes switching to a two-stage or ductless system that gives the upstairs its own zone. Call (903) 494-7686 and we will measure static pressure and airflow before recommending anything.
Yes. If the air handler or ductwork sits in an unconditioned, open-air space under a stilt home, it is exposed to the same salt mist and humidity as the outdoor condenser. That means the air handler cabinet needs coastal protection, the ducts need to be sealed and potentially insulated against condensation, and the system needs proper drainage to handle the humidity load.
Our crew works on stilt homes along Taylor Lake and the canal-front streets regularly. We know where the corrosion starts and where the condensation collects, and we build those factors into the quote. Call (903) 494-7686 for a written estimate.
Maybe not as-is. A modern heat pump with auxiliary heat strips can draw more than a 100-amp panel safely supplies, so the panel may trip breakers or overheat when the backup heat kicks on. Many 1985-era Seabrook homes need a panel upgrade to 200-amp service before or alongside a heat pump installation.
We will check the panel during the estimate and tell you if an upgrade is required and what it adds to the job. The upgrade cost is quoted in writing before anything starts. Call (903) 494-7686 to schedule a free assessment at your Seabrook home.
We replace pitted or rusted cabinets with coastal-rated outdoor units that use corrosion-treated coils and coated panels designed for salt-laden air. In El Lago, where onshore breezes carry salt mist constantly, a standard cabinet will rust through within 5 – 7 years. A coastal-treated unit lasts roughly twice as long.
If the existing cabinet is still structurally sound but showing early pitting, we can sometimes apply a protective coating as part of a heat pump service visit. But once the coil itself starts leaking, replacement is usually the right call. Call (903) 494-7686 and we will inspect it in person.
Written by Marco Benitez, Owner at Dalton Heating & Air Houston, serving Seabrook and the bayside communities with heat pump installation and service under The Garrison Standard.